RADIFOCUS™ HAEMOSTASIS VALVE ll

Haemostatic valve prevents blood reflux when a catheter is inserted in a vessel for angiographic or other purposes

   Characteristics
   Cross-cut valve.
   Compatible with catheter sizes up to 7 Fr.    With side tube and three-way stopcock.

RADIFOCUS™ Torque Device

A supportive device mainly intended for use when guiding a disposable guidewire, which is used for percutaneous angiography and treatment under fluoroscopy, to the target site.
Torque device is compatible with guidewires between 0.010" (0.26 mm) and 0.038" (0.97 mm) in size.

RADIFOCUS™ Angiographic Catheter

Our Hybrid solutions are a harmonious combination of woven surgical grafts and stent grafts that enable you to address your patient’s aorta.Smooth navigation thanks to the polyamide surface, rounded tip and one-piece body structure.

Outlook™

Large lumen to allow contrast media to be injected at high flow rates and designed to exhibit good torque control.Braiding with variable pitch offers partial proximal rigidity and increased flexibility at the distal end.

RADIFOCUS™ Optitorque™

A full line of angiographic catheters designed for easy manipulation. Single catheter concept decreases procedure and fluoroscopy times, providing both procedural and cost-efficiency.

Eliminate™

A fast and simple solution for effective thrombus aspiration.
Eliminate™ is an innovative aspiration catheter designed to offer a balance between crossing performance, kink resistance and thrombus-aspiration capability.

Heartrail™ II

Optimize your challenging procedure.
Heartrail™ II will improve your back-up force when using Ikari curves right and left during transradial interventions.

Climber™

Which curves shape you?
Climber™ represents the ideal combination of dedicated hydrophilic coating, large inner lumen and passive back-up support.

FineCross™ MG

Designed for success in complex procedures.
FineCross™ MG microcatheter integrates crossability and guidewire support to treat challenging cases, involving tortuous vessels, CTO, bifurcations, and highly stenosed and calcified lesions.

Ultimaster™ Nagomi™

Go anywhere with Ultimaster™ Nagomi™. Ultimaster™ Nagomi™ is building on the Heritage of Strong Clinical Evidence of the Ultimaster™ Stent Family. Navigate the complexities of every procedure for optimal outcomes for/with every patient.

Ultimaster™ Tansei™

Ultimaster™ Tansei™ has all the key features of Ultimaster™ for supporting vascular repair4 and builds on the heritage of the Ultimaster™ stent and Terumo PTCA balloon technology Innovative abluminal bioresorbable coating.

Ultimaster™

Long-term efficacy and safety proven by RCT in patients with complex background. The biggest real-world BP-DES registry shows favorable clinical performance. The BP-DES with the longest history.

Glidesheath Slender™

Glidesheath Slender™ is designed with a thin wall structure where the outside diameter is reduced by one French size while the inner-diameter equivalent is maintained. Glidesheath Slender™ is coated with Terumo’s proprietary hydrophilic coating, allowing for smooth insertion and removal.

RADIFOCUS™ Introducer ll

Standard introducer sheath kit. Introducers are intended to be inserted percutaneously into a vessel to facilitate the entire interventional procedure.

RADIFOCUS™ Introducer II Mcoat™

Hydrophilic coated sheath for radial access. RADIFOCUS™ Introducer II Mcoat™ is coated with Terumo’s proprietary hydrophilic coating, allowing for smooth insertion and removal.

VISICUBE™ - Quick IVUS

VISICUBE™ is an Intravascular Ultrasound (IVUS) Imaging System to be used with a dedicated IVUS catheter for imaging and visualizing the artery lumen and vessel surface layer.

AltaView™ - Quick IVUS

The AltaView™ catheter is intended to be used for imaging and inspecting the artery lumen and the surface layer of vessel walls by using ultrasound.

Navifocus™ WR

Safer inspection for distal lesion. The Navifocus™ WR catheter is intended to be used for imaging and inspecting the artery lumen and the surface layer of vessel walls by using ultrasound.

RADIFOCUS™ Guide Wire M Stiff Type

A nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (Mcoat™) for good torque control and shape memory as well as high stiffness and resistance.
Designed to direct a catheter to the desired anatomical location in the vascular system (peripheral, cerebral as well as coronary vasculature) during diagnostic or interventional procedures.

RADIFOCUS™ Guide Wire M Standard Type

A nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (Mcoat™) for vessel access, lesion crossing and device support.
Designed to direct a catheter to the desired anatomical location in the vascular system (peripheral, cerebral as well as coronary vasculature) during diagnostic or interventional procedures.

RADIFOCUS™ Guide Wire M

A nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (Mcoat™) for vessel access, lesion crossing and device support.
Designed to direct a catheter to the desired anatomical location in the vascular system (peripheral, cerebral as well as coronary vasculature) during diagnostic or interventional procedures.

Ryurei™

Ryurei™ has superior crossability thanks to the combination of low distal profiles and Terumo's hydrophilic Mcoat™.
The short balloon bonding and reinforced shaft1 results in enhanced trackability while maintaining excellent pushability.

Accuforce™

The great balance between high pressure and high resistance, accurate dilatation and advanced deliverability.
Accuforce™ is the latest generation of non-compliant PTCA balloons.